HDPE

Polyethylene

High density polyethylene, also known as HDPE, odorless, non-toxic, feel like wax, good chemical stability, can resist most of the acid, alkali, organic solutions and hot water erosion. Good electrical insulation, easy to weld, through the food FDA test, can be used as food grade parts, the use of temperature 70°C~90°C.

HDPE

Advantage

Characteristic:

Low density, good toughness (also suitable for low temperature conditions), good tensile property, good electrical and dielectric insulation, low water absorption, low water vapor permeability, good chemical stability, wear resistance.

Information

ShapeColour
152158_86214.png152130_58400.png
 
 
 
 
 
 
 
 
PlateBarBlackYellowBluleGreenRedGrayWhite

Orange

Plate
Thickness(mm)Breadth(mm)Length(mm)
8-160610/10001220/2000
Bar
Diameter(mm)Length(mm)
8-2001000/2000

Specific gravit

ASTM D792

g/cm3

0.96

Tensile yield strength

ASTM D638

Mpa

30

Breaking elongation

ASTM D638

%500

Bending strength

ASTM D790

Mpa35

Flexural modulus

ASTM D790

Mpa1370

Shore hardness

ASTM D2240

D75

Impact strength

ASTM D256J/M80

Melting point

DSC

°C120

Heat distortion temperature

ASTM D648

°C80

Operating temperature

-°C90

Maximum operating temperature

-°C110

Thermal conductivity

DIN  52612-1W/(K-M)15.5

Coefficient of linear themal 

ASTM D696

10-5-1/K

120

Dielectric strength

ASTM D150KV-mm2.4
Volume resistivitASTM D257Ω.cm1014

Surface resistivity

ASTM D257Ω1016
Water absorption

23°C 60%RH

% 0.01

Acid resistance

23°C 60%RH


+

Alkali resistance



+

Acid and alkali resistance



+

Resistance to sodium chlorate



+

Resistance to aromatic compounds



+

Resistance to ketone

23°C 60%RH


0

Resistance to hot water

23°C 60%RH
+            

Flammability

UL 94
HB

Viscosity

-
0

Non toxic

EEC 90/128 FDA
+

Coefficient of friction

DIN 53375
0.3

Anti-ultraviolet

-
0

Related product recommendations